Apple iPhone SE Radiation Levels
Head SAR1.14 W/kg which is Ranked #56 at 71.25% of Legal Limit
Radiation Levels | HEAD | BODY | HOT SPOT |
---|---|---|---|
Cellular Only | 1.14 W/kg | 1.14 W/kg | 1.14 W/kg |
Wi-Fi + Cellular | 1.59 W/kg | 1.58 W/kg | 1.56 W/kg |
Apple iPhone Se SAR Level Summary:
The cellular transmission SAR values for the Apple iPhone Se (FCC ID BCG-E3042A) are 1.14 W/kg (watts per kilogram) at the head and 1.14 W/kg when worn on the body. The hotspot/Airplay SAR level is 1.14 W/kg. The simultaneous transmission SAR values for iPhone SE (cellular plus Wi-Fi) is 1.59 W/kg at the head, 1.58 W/kg when worn on the body, and 1.56 W/kg when used as a hotspot simultaneously with other transmitters active.
Select a phone to compare SAR levels to other popular phones
Apple iPhone SE Safety Tip: Turning Off Wi-Fi and Bluetooth Reduces Radiation.
This SAR chart reveals how turning off Wi-Fi and Bluetooth on your Apple iPhone SE can significantly reduce your exposure to radiation. Our SAR comparison chart shows that by simply turning off these transmitters, you can lower the RF radiation exposure to your head by 28.3%, and you can lower exposure to the body by 27.8%, when considering these differences between cellular-only (Wi-Fi/Bluetooth OFF) and simultaneous use exposure (Wi-Fi/Bluetooth ON), a wise way to reduce excessive phone radiation is to tap off unnecessary transmitters when not in use. Additionally, when using your phone as a hotspot, turning off Bluetooth can reduce your exposure by up to 36.8% according to the FCC SAR report for device number BCG-E3042A.
Apple iPhone SE SAR Levels
RADIATION LEVELS | CELLULAR ONLY | (% DIFF) | SIMULTANEOUS |
---|---|---|---|
HEAD | 1.14 W/kg | 28.3% | 1.59 W/kg |
BODY | 1.14 W/kg | 27.8% | 1.58 W/kg |
HOTSPOT | 1.14 W/kg | 36.8% | 1.56 W/kg |
Key Takeaways
- Children vs Adults: Children have higher SAR levels due to thinner skulls and developing tissues, making them more vulnerable to radiation.
- Wi-Fi Impact: Simultaneous use of cellular and Wi-Fi transmission increases SAR levels for all age groups.
- Precautionary Measures: Using radiation protection products like QuantaCase can help mitigate these risks, especially for younger users.
By understanding these differences, parents and guardians can make informed decisions to better protect their children from excessive microwave radiation exposure, emphasizing the need for safer smartphone usage practices and protective accessories like QuantaCase.
Avoid Excessive iphone-se Cell Phone Radiation!
To minimize the potential health risks associated with cell phone radiation, it’s important to reduce exposure as much as possible. This can be achieved by using hands-free devices and keeping the phone away from the body, as well as by using a phone case with built-in radiation shielding technology.
The best example is the RF Safe® iphone-se QuantaCase™ RFS1. This case is designed to deflect the strongest line-of-sight radiation away from the body while not obstructing the phone’s antenna. RF shielding technology reduces excessive radiation exposure across a wide range of radio frequencies, including 5G, Wi-Fi, and cellular. Additionally, the case features an integrated single-slot RFID-blocking wallet for added security.
The QuantaCase RFS1 provides RFID and anti-radiation protection without any conductive or signal-impeding components in the back of the case, allowing the phone to operate at its lowest possible output level and reducing the amount of harmful radiation emitted. The case also protects the phone from scratches, cracks, and dings.
To use the RF Safe® iphone-se QuantaCase™ RFS1 effectively, it’s recommended to always close the front flip cover and use the speakerphone when privacy is not an issue. When storing in a pocket, face the front flap towards the body to deflect the strongest line-of-sight radiation. When texting, fold the flap behind the phone to shield the back while held in hand.
It’s important to keep in mind that maintaining a distance from the phone is the best way to reduce EMF exposure. However, using a phone case with built-in radiation shielding technology like the RF Safe® iphone-se QuantaCase™ RFS1 can provide an extra layer of protection in an ultra-thin design.
The Specific Absorption Rate (SAR) of a mobile device measures the amount of radio frequency energy absorbed by the body during device usage.
The SAR values for the iphone-se (FCC ID BCG-E3042A) are as follows:
- 1.14 W/kg when held at the head with cellular transmission only
- 1.14 W/kg when worn on the body with cellular transmission only
- 1.14 W/kg when used as a Hotspot or Airplay
- 1.59 W/kg when held at the head with simultaneous cellular and Wi-Fi transmission
- 1.58 W/kg when worn on the body with simultaneous cellular and Wi-Fi transmission
- 1.56 when used as a Hotspot simultaneously with other transmitters active.
Test reports filed with the U.S. Federal Communications Commission (FCC), the Specific Absorption Rate (SAR) for the iPhone SE for cellular transmission only at the head is 1.14 watts per kilogram (w/kg), same goes for when worn on the body the SAR is 1.14 w/kg too. The wireless router SAR is also 1.14 w/kg.
The SAR for simultaneous transmission (cellular plus Wi-Fi) is 1.59 w/kg at the head, 1.58 w/kg when worn on the body, and 1.56 w/kg when the phone is used as a hotspot.
Apple iPhone SE - Specs sar
General
-
Announced
16 March 2016
-
Status
Available
Display
Camera
Battery
Hardware
Connectivity
Sound
Design
-
Type
Design Type called form factor refers to a mobile phone's size, shape, and style as well as the layout and position of major components of phone. There are three major form factors seen in mobile phones => bar phones, flip phones and sliding phones. Bar
Network
-
SIM
Standard SIM
USA SAR Level
-
FCC Approval Date
02 February 2016
-
FCC ID
BCG-E3042A
-
Head SAR Level
1.14 W/kg
-
Body SAR Level
1.14 W/kg
-
Product Specific Use
1.14 W/kg
-
Simultaneous Head SAR
1.59 w/kg
-
Simultaneous Body SAR
1.58 w/kg
-
Hotspot SAR
1.56 w/kg
EU SAR Level
-
Head SAR Level
0.97 W/kg
-
Body SAR Level
0.99 W/kg
Apple iPhone SE - Reviews
[products limit="1" columns="1" category="quantacase-rfs1, iphone-se" cat_operator="AND" orderby="date"]Apple iPhone SE - Gallery
Apple iPhone SE - Videos
Apple iPhone SE - Offers
Apple iPhone SE - SAR Levels
USA SAR Level
-
FCC Approval Date
02 February 2016
-
FCC ID
BCG-E3042A
-
Head SAR Level
1.14 W/kg
-
Body SAR Level
1.14 W/kg
-
Product Specific Use
1.14 W/kg
-
Simultaneous Head SAR
1.59 w/kg
-
Simultaneous Body SAR
1.58 w/kg
-
Hotspot SAR
1.56 w/kg
EU SAR Level
-
Head SAR Level
0.97 W/kg
-
Body SAR Level
0.99 W/kg