Apple iPhone XR Radiation Levels
Hotspot SAR (Simultaneous)W/kg is Ranked #0 at % of Legal Limit
Radiation Levels | HEAD | BODY | HOT SPOT |
---|---|---|---|
Cellular Only | 0.9 W/kg | 1.1 W/kg | 1.1 W/kg |
Wi-Fi + Cellular | 1.41 W/kg | 1.59 W/kg | 1.59 W/kg |
Select a phone to compare SAR levels to other popular phones
Apple iPhone XR Safety Tip: Turning Off Wi-Fi and Bluetooth Reduces Radiation.
This SAR chart reveals how turning off Wi-Fi and Bluetooth on your Apple iPhone XR can significantly reduce your exposure to radiation. Our SAR comparison chart shows that by simply turning off these transmitters, you can lower the RF radiation exposure to your head by 36.2%, and you can lower exposure to the body by 30.8%, when considering these differences between cellular-only (Wi-Fi/Bluetooth OFF) and simultaneous use exposure (Wi-Fi/Bluetooth ON), a wise way to reduce excessive phone radiation is to tap off unnecessary transmitters when not in use. Additionally, when using your phone as a hotspot, turning off Bluetooth can reduce your exposure by up to 44.9% according to the FCC SAR report for device number BCG-E3220A.
Apple iPhone XR SAR Levels
RADIATION LEVELS | CELLULAR ONLY | (% DIFF) | SIMULTANEOUS |
---|---|---|---|
HEAD | 0.90 W/kg | 36.2% | 1.41 W/kg |
BODY | 1.10 W/kg | 30.8% | 1.59 W/kg |
HOTSPOT | 1.097 W/kg | 44.9% | 1.59 W/kg |
Key Takeaways
- Children vs Adults: Children have higher SAR levels due to thinner skulls and developing tissues, making them more vulnerable to radiation.
- Wi-Fi Impact: Simultaneous use of cellular and Wi-Fi transmission increases SAR levels for all age groups.
- Precautionary Measures: Using radiation protection products like QuantaCase can help mitigate these risks, especially for younger users.
By understanding these differences, parents and guardians can make informed decisions to better protect their children from excessive microwave radiation exposure, emphasizing the need for safer smartphone usage practices and protective accessories like QuantaCase.
Avoid Excessive iphone-xr Cell Phone Radiation!
To minimize the potential health risks associated with cell phone radiation, it’s important to reduce exposure as much as possible. This can be achieved by using hands-free devices and keeping the phone away from the body, as well as by using a phone case with built-in radiation shielding technology.
The best example is the RF Safe® iphone-xr QuantaCase™ RFS1. This case is designed to deflect the strongest line-of-sight radiation away from the body while not obstructing the phone’s antenna. RF shielding technology reduces excessive radiation exposure across a wide range of radio frequencies, including 5G, Wi-Fi, and cellular. Additionally, the case features an integrated single-slot RFID-blocking wallet for added security.
The QuantaCase RFS1 provides RFID and anti-radiation protection without any conductive or signal-impeding components in the back of the case, allowing the phone to operate at its lowest possible output level and reducing the amount of harmful radiation emitted. The case also protects the phone from scratches, cracks, and dings.
To use the RF Safe® iphone-xr QuantaCase™ RFS1 effectively, it’s recommended to always close the front flip cover and use the speakerphone when privacy is not an issue. When storing in a pocket, face the front flap towards the body to deflect the strongest line-of-sight radiation. When texting, fold the flap behind the phone to shield the back while held in hand.
It’s important to keep in mind that maintaining a distance from the phone is the best way to reduce EMF exposure. However, using a phone case with built-in radiation shielding technology like the RF Safe® iphone-xr QuantaCase™ RFS1 can provide an extra layer of protection in an ultra-thin design.
The Specific Absorption Rate (SAR) of a mobile device measures the amount of radio frequency energy absorbed by the body during device usage.
The SAR values for the iphone-xr (FCC ID BCG-E3220A) are as follows:
- 0.9 W/kg when held at the head with cellular transmission only
- 1.1 W/kg when worn on the body with cellular transmission only
- 1.1 W/kg when used as a Hotspot or Airplay
- 1.41 W/kg when held at the head with simultaneous cellular and Wi-Fi transmission
- 1.59 W/kg when worn on the body with simultaneous cellular and Wi-Fi transmission
- when used as a Hotspot simultaneously with other transmitters active.
According to test reports filed with the Federal Communications Commission (FCC ID BCG-E3220A, the Specific Absorption Rate (SAR) for the Apple iPhone XR is 0.90 watts per kilogram (w/kg) at your head, and 1.10 w/kg when worn on your body. The Apple iPhone XR hotspot SAR is 1.10 W/kg. The SAR for simultaneous transmission (cellular, Wi-Fi and Bluetooth) for the Apple iPhone XR is 1.59 W/kg when used as a hotspot simultaneously with all other transmitters active.
All SAR levels reported for the Apple iPhone XR to the FCC are averaged over one gram of body tissue corresponding to the maximum allowable level of 1.6 w/kg. The SAR levels will vary depending upon your specific cell phone carrier (e.g., AT&T, Sprint, T-Mobile, or Verizon).
The Apple iPhone XR minimum separation distance for body-worn and head testing was 5 mm (about two-tenths of an inch), that requires a smartphone user to maintain this minimum distance for SAR safety compliance.
Apple iPhone XR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user’s body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
It is VERY important to note the minimum separation distance for head and body-worn testing is 5 mm (about two-tenths of an inch). You must at all times have this amount of distance between your body and phone when in operation to comply with regulatory safety values!
The highest reported Apple iPhone XR levels for the head, body-worn accessory for simultaneous transmission use conditions are 1.41 W/kg and 1.59 respectively.
Simultaneous Transmission Note(s):
1. Wi-Fi 2.4GHz & Bluetooth cannot transmit simultaneously.
2. Wi-Fi 2.4GHz &Wi-Fi 5GHz cannot transmit simultaneously.
3. WWAN ANT1, ANT2, ANT3,and ANT4 cannot transmit simultaneously
Apple iPhone XR - Specs sar
General
-
Phone
Apple iPhone XR
-
Technology
GSM / CDMA / HSPA / EVDO / LTE
-
Announced
12 September 2018
-
Status
Available. Released 2018, October 26
-
Price
About 310 EUR
-
Model Names
A2105, A1984, A2107, A2108, A2106, iPhone11,8
Display
-
Type
Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor) Liquid Retina IPS LCD, 625 nits (HBM)
-
Size
6.1 inches, 90.3 cm2 (~79.0% screen-to-body ratio)
-
Resolution
828 x 1792 pixels, 19.5:9 ratio (~326 ppi density)
-
Protection
Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind. Scratch-resistant glass
Camera
-
Main Camera
Camera is able to capture photographs and usually videos, The most important characteristics of a camera are the resolution (measured in megapixels), lens focus type (fixed or automatic), higher megapixel cameras are known to capture higher quality photos, but not always a good measurement of the photos quality. Single Camera: 12 MP, f/1.8, 26mm (wide), 1/2.55", 1.4m, PDAF, OIS
-
Main Features
Quad-LED dual-tone flash, HDR (photo/panorama)
-
Video
4K@24/30/60fps, 1080p@30/60/120/240fps, HDR, stereo sound rec.
-
Selfie Camera
Flash Light => There is commonly two types of flash lights are used in camera mobile phones, LED Flash (LED flash offers lower power consumption with drive circuitry that takes up very little room, LEDs can be strobed faster than any other light source), Xenon Flash (xenon flash produces an extremely intense full-spectrum white light for a very short duration) Single Camera: 7 MP, f/2.2, 32mm (standard)
SL 3D, (depth/biometrics sensor) -
Selfie Camera Features
HDR
-
Selfie Camera Video
1080p@60fps
Battery
-
Type
Battery Type => Cell phones run on various kinds of batteries depending on the manufacturer, phone size or shape and features. There are basically four types of cell phone batteries => Lithium Polymer, Lithium Ion, Nickel Metal Hydride and Nickel Cadmium. Li-Ion 2942 mAh, non-removable (11.16 Wh)
-
Battery Test
Endurance rating 78h
-
Charging
15W wired, PD2.0, 50% in 30 min (advertised)
Wireless (Qi)
Hardware
-
Operating System
iOS 12, upgradable to iOS 16.3
-
Chipset
Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming. Apple A12 Bionic (7 nm)
-
CPU
CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone. Hexa-core (2x2.5 GHz Vortex + 4x1.6 GHz Tempest)
-
GPU
GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion. Apple GPU (4-core graphics)
-
Internal Storage
Internal Storage is a data storage space (flash memory) mostly used in smartphones, tablets and other electronic devices where operating system, apps, music, photos, videos, files and other user data Is stored. 64GB 3GB RAM, 128GB 3GB RAM, 256GB 3GB RAM
NVMe -
Card Slot
Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras. No
-
Sensors
Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device. Face ID, accelerometer, gyro, proximity, compass, barometer
-
Performance
AnTuTu: 341196 (v7), 422465 (v8)
GeekBench: 11437 (v4.4), 2690 (v5.1)
GFXBench: 58fps (ES 3.1 onscreen)
Connectivity
-
Wi-Fi
Wi-Fi is a popular wireless networking technology using radio waves to provide high-speed network connections that allows devices to communicate without cords or cables, Wi-Fi is increasingly becoming the preferred mode of internet connectivity all over the world. Wi-Fi 802.11 a/b/g/n/ac, dual-band, hotspot
-
Bluetooth
Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices. 5.0, A2DP, LE
-
USB
Lightning, USB 2.0
-
GPS
GPS The Global Positioning System is a satellite-based radio navigation system, GPS permits users to determine their position, velocity and the time 24 hours a day, in all weather, anywhere in the world, In order to locate your position, your device or GPS receiver must have a clear view of the sky. GPS, GLONASS, GALILEO, QZSS
-
NFC
NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches. Yes
-
Radio
No
Sound
-
Loudspeaker
Yes, with stereo speakers
-
3.5mm Jack
No
Design
-
Type
Design Type called form factor refers to a mobile phone's size, shape, and style as well as the layout and position of major components of phone. There are three major form factors seen in mobile phones => bar phones, flip phones and sliding phones. Bar
-
Dimensions
150.9 x 75.7 x 8.3 mm (5.94 x 2.98 x 0.33 in)
-
Weight
194 g (6.84 oz)
-
Colors
Black, Red, Yellow, Blue, Coral, White
-
Build
Glass front (Corning-made glass), glass back (Corning-made glass), aluminum frame (7000 series)
Network
-
Speed
HSPA, LTE-A, EV-DO Rev.A 3.1 Mbps
-
SIM
Nano-SIM and eSIM or Dual SIM (Nano-SIM, dual stand-by) - for China
IP67 dust/water resistant (up to 1m for 30 min)
Apple Pay (Visa, MasterCard, AMEX certified) -
4G Network
1, 2, 3, 4, 5, 7, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 29, 30, 32, 34, 38, 39, 40, 41, 66, 71
-
3G Network
HSDPA 850 / 900 / 1700(AWS) / 1900 / 2100
CDMA2000 1xEV-DO -
2G Network
GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 (dual-SIM) - for China
CDMA 800 / 1900
USA SAR Level
-
FCC Approval Date
27 September 2018
-
FCC ID
BCG-E3220A
- FCC Report Link
-
US SAR Ratings
USA Legal Limit is 1.6 W/kg - FCC SAR testing is measured in watts per kilogram (or W/kg) averaged over ONE gram of simulated biological tissue.
-
Head SAR Level
0. 90 W/kg
-
Body SAR Level
1.10 W/kg
-
Product Specific Use
1.097 W/kg
-
Simultaneous Transmission
1.59 W/kg
-
Simultaneous Head SAR
1.41 W/kg
-
Simultaneous Body SAR
1.59 W/kg
-
Hotspot SAR
1.59 W/kg
EU SAR Level
-
EU SAR Ratings
EU SAR
-
Head SAR Level
0.99 W/kg
-
Body SAR Level
0.99 W/kg
Apple iPhone XR - Reviews
[products limit="1" columns="1" category="quantacase-rfs1, iphone-xr" cat_operator="AND" orderby="date"]Apple iPhone XR - Gallery
Apple iPhone XR - Videos
Apple iPhone XR - Offers
Apple iPhone XR - SAR Levels
USA SAR Level
-
FCC Approval Date
27 September 2018
-
FCC ID
BCG-E3220A
- FCC Report Link
-
US SAR Ratings
USA Legal Limit is 1.6 W/kg - FCC SAR testing is measured in watts per kilogram (or W/kg) averaged over ONE gram of simulated biological tissue.
-
Head SAR Level
0. 90 W/kg
-
Body SAR Level
1.10 W/kg
-
Product Specific Use
1.097 W/kg
-
Simultaneous Transmission
1.59 W/kg
-
Simultaneous Head SAR
1.41 W/kg
-
Simultaneous Body SAR
1.59 W/kg
-
Hotspot SAR
1.59 W/kg
EU SAR Level
-
EU SAR Ratings
EU SAR
-
Head SAR Level
0.99 W/kg
-
Body SAR Level
0.99 W/kg